Cash

Control your cashbox, dispenser, and recycler from this area, as well as review cash handling reports. If any devices are missing from this page, you may have yet to configure them at the BATM.

Configure your DIspensers at the BATM

Configure your Recycler at the BATM

Scroll to the bottom of this article for additional articles relating to cash recycling/dispensing.

Cash Boxes

The “dispenser_reject” group accounts for banknotes that are intercepted (and rejected) while dispensing. Check your Dispenser’s Reject Tray if an amount is listed.
- See: Configure your Dispenser | Reject Tray

	Turn on/off the dispenser cassette.
	Remove the selected cassette from the configuration.
	Change the fiat denomination in the cassette.
	Set the quantity of banknotes in the cassettes.
	Allows you to specify an automatic dispenser refill quantity. See: Dispenser Refill (Standard Balances)
	Remove the selected drum from the configuration.
	Reset the selected drum from the configuration.
	Add another dispenser cassette to the configuration. NOTE: never exceed the actual installed quantity of cassettes.
	Triggers an onsite dispenser test to ensure the reject mechanism is working as expected. “Reject” banknotes are not dispensed, and accumulate in the Dispenser reject tray. See: Configure your Dispenser \| Reject Tray Recyclers do not have reject trays.

BANKNOTE HISTORY

Displays a log of the banknotes received & dispensed by your BATM.

When banknote labels are assigned to the Organization and the Terminal, an optional “ASSIGN LABEL” button will enable cash to be marked. This is useful for such services as Bankline. See:

CASH COLLECTIONS

Displays a log of the collections activity on your BATM:

Also see: Locations | Cash Collection Days

CASH REPLENISHMENTS

Displays the log of cash replenishment at the BATM. This applies to 2-way BATMs only (with dispensers/recyclers).

Recycler Float Downs

Displays the log of Recycler purges (“Float Downs”).

See: Recycler Float Downs - General Bytes Knowledge Base - Confluence