Set the BATM Server IP

You’ll need to tell the BATM where to find your server. The server’s public IP must be entered in the secure, advanced administration screen.

1. Make sure that you have already configured a WiFi/Ethernet connection.

• Wifi instructions here.

• Ethernet instructions here.

2. Access the secure, ADVANCED ADMINISTRATION screen.

• Instructions found here.

3. Reinsert the cashbox/stacker!

4. Select “CHANGE SERVER”:

Open

5. Enter the public IP address of your server and click on OK.

• Click here to find a few suggested methods to identify your public IP.

6. Press EXIT and permit the BATM a few minutes to connect.

The terminal should now connect to your server.