Individual Terminal settings are described within this section.
Terminal Reports & Logs:
...
Transaction Logs & Analytics
...
Individual Terminal settings are described within this section.
When using Terminal Templates, many of these options will be located & controlled there.
Terminal Reports & Logs:
TRANSACTIONSTransaction Logs & Analytics |  |
EVENTSEvent Log: your BATM Heartbeat |  |
CASHCash Control & Reports |  |
ACTIONS |
Remotely control your BATM. |  |
Terminal Status & Statistics (quick view):
...
Terminal Display: Exchange Rates (Buy/Sell) as seen by the customer.
Updated At: the last time the BATM updated it's screen.
Terminal Time: the time the individual BATM has locally.
Server Time: the time of the event according to CAS.
Available Cash For Dispensing: Available/Allocated for SELL purposes.
Balance - the amount currently held by your stacker/cashbox/reycler: a transaction is in progress, and this is the amount of fiat involved.
Remaining Anonymous Customer Limits (where applicable).
...
| Note |
|---|
|
Most of these settings have been moved
...
Serial Number: from the label! Used throughout CAS to uniquely identify each BATM.
...
Network Info: the type of network this BATM was last connected to, and it's last known IP address.
Restore point version: information about the most recent restore point created.
Acceptors: the type of bill acceptor (and billset) currently installed in your BATM is displayed here.
DEPRECATED: Shared Secret Hash **: this is emailed to you by GB after you received the BATM. There is no error checking on this, so be careful to copy and paste accurately and entirely.
no longer visible or required since version 20200913.
Name: an arbitrary name you call this particular BATMName: an arbitrary name you call this particular BATM. Be descriptive. Anything that will help you pick it out of a list will do.
Terminal Locked: Terminal settings cannot be changed while locked by an Administrator.
...
Enable this if you are certain the IP will never unexpectedly change.
The IP to be entered is your router’s PUBLIC IP. Entering a local/private IP will result in the BATM being blocked. e.g. 192.168.0x.9 x is a “private” IP - the opposite of public. More info?
Registration Number: helps Update IP Whitelist automatically unless Terminal restarted: enable when IP’s are dynamically set by the Internet provider. When they assign a new public IP to the router, this setting will automatically accept the new IP and update the setting.
Registration Number: helps identify a BATM from the BATM screen (when implemented).
...
Terminal Settings may be standardized and applied across deployed models.
...
See: https://generalbytes.atlassian.net/l/c/giG3y00Z
...
Create a Terminal Setting to assign most of the remaining settings to a common, shared value.
For more details, see: Terminal Settings
...
Owner **: the Organization that owns this BATM terminal (admin only).
...
AML/KYC Setting **: select the appropriate AML/KYC policy.POS: (undocumented & unsupported)
See: AML / KYC Settings
Skin: a custom theme that you may choose to display on this terminal.
...
See: Skins
Terminal Permission Template: when using a a Terminal Permission Template, select it here.
...
Administration Key: This is the text to be encoded in a QR code. The resulting QR code is shown to the BATM when requesting access to BATM Admin functions.
The default key is already implemented, so leave this blank during initial setup.
Do not change this unless you have read this article: Change the BATM Admin QR Code
...
Controlled by the “Terminal Active” setting above (inactive = display this “inactive” displays the specified message).
Auto Restart: when enabled, this will trigger the BATM to automatically reboot when the Internet has been unavailable for an hour. It will only restart a maximum of 6 times - then give up.
Also see: Error: Server is not Reachable
Use Hardcoded Blacklist Addresses: when enabled, destination wallets presented by a Diagnostics Key: the text to be encoded in a QR code. The resulting QR code is shown to the BATM when triggering a BATM self-test. This may be left blank during initial setup.
VPN Required (deprecated): a secure VPN tunnel is required for this Terminal to connect to CAS.
Auto Restart: when enabled, this will trigger the BATM to automatically reboot when the Internet has been unavailable for an hour. It will only restart a maximum of 6 times - then give up.
Also see: Error: Server is not Reachable
Use Hardcoded Blacklist Addresses: when enabled, destination wallets presented by a customer are scanned against a hardcoded blacklist for fraudulent or other verified malicious actors.
...
Allow Balance Check: permit your customers to check their coin balances at the BATM.Don't Accept
a BUY Rate Source must be configured & live for the balance to be shown.
Don't Accept Cash If You Don't Have Enough Supply: stop a BUY if there’s insufficient coin in your hot wallet. This “Supply” does not check Exchange include fiat balances, only coin balances (BTC, ETH, etc).
| Tip |
|---|
If the transaction fails, you may always opt to send the coin manually to the customer.
|
...
Allow Email Or SMS Purchases: your customers will have the option to have a private key sent to them directly. Accessed via “Don’t Have a Wallet?” option during BUYs,.
Enable wallet backups in the event the wallet fails to arrive: /wiki/spaces/ESD/pages/2380595205
...
QR Code Sticker Detection: this option detects a QR code sticker attack. Setup a notification policy if this attack is active and/or common in your deployment area.
Show Exchange Price Chart Screensaver: displays a price chart if you use an Exchange in your Crypto Settings BUY.
Private Administration: reduces the admin screen size/profile when administering the BATM models with larger screens (BATMThree/BATMFour).
Hide redeem button when sell is not possible: in some situations, you may still accept redemptions even when SELL transactions are not possible .Ignore (2-way BATMs only).
Ignore Transaction Failures: do not report transaction failures to the onsite customer. This might be implemented when a standby Operator is monitoring all transactions & is manually competing the transactions.
Cash Fraud Detection: when equipped with door sensors, the BATM will reject any attempted transactions while a vault sensor is triggered (door is open) and this setting is enabled.
Enable CashBox Video Recording: record cashbox service servicing (useful when your cash is handled by a third-party (e.g. armored-car service). See: CashBox Video Recording
Customer can cancel transaction: after cancelling, the customer will have to contact you for a cash refund, but this option permits the customer to cancel the transaction despite having inserted cash.
Disable Door Sensor: check this option if you’re having detection issues. You must reboot the BATM after disabling the option (and thus re-enabling the door sensor).
Skip Privacy Notice: don’t show the privacy notice normally displayed at the beginning of a transaction.
Blur Detection Limit: (default=3) set this to change the number of times the BATM requests a rescan of “blurry” documents presented during KYC verification. Zero (“0”) = turn off this feature.
Currencies
...
You'll need to have at least one type of paper currency setup in (“Fiat Settings”) and one type of crypto-currency setup in (“Crypto Settings”) to complete this section.
Main Cash Currency **: select the primary type of currency your bill acceptor is designed to receive. Your particular bill acceptor model can be determined from the BATM admin screen.
| Warning |
|---|
This is a mandatory field and must be entered to save the Terminal setting. |
| Tip |
|---|
See Acceptors (above) to identify your supported billset.
|
Additional Cash Currencies: if your bill acceptor takes multiple currencies, specify them here. See the bill acceptor specifications for your BATM to determine what currencies are supported.
Example: for US sales - the US Dollar, the Euro, & the Canadian Dollar (USDEURCAD) billsets are installed by default in the BATM, so in this example you would set “USD” as the “Main Cash Currency” (above) and add “EUR” and “CAD” here. You may skip this area if you only want to accept the main cash currency (USD).
Crypto Currency **: select the types of crypto-currency you support. Each type will need an entry in the main menu's “Crypto Settings”.
| Warning |
|---|
This is a mandatory field and must be entered to save the Terminal setting. |
| Tip |
|---|
Setup each coin with its own Crypto Setting. |
Fiat Settings
...
Assign a fiat setting to each Cash Currency identified in the previous step“Privacy Notice” normally displayed prior to requesting AML/KYC required documents (during a transaction).
Show Marketing Agreement Screen: when enabled, will show the contents of the Custom String:
Skip Asking for Marketing Agreement E-mail: when checked/enabled, the BATM won’t request the customer’s email (for marketing). Useful when the email is already known/set.
Blur Detection Limit: (default=3) set this to change the number of times the BATM requests a rescan of “blurry” documents presented during KYC verification. Zero (“0”) = turn off this feature.
Withdraw Configuration: (for Terminals supporting cash dispensers).
Withdraw using QR code (printed sell ticket or delivered as an SMS)
Withdraw using phone number
Withdraw using QR code or phone number
...
Banknote Labels
When configured in your Organization, banknote labels allow you to gain provisional credit for cash on hand in Terminals assigned the label. This is specifically used for Bankline support. Assign the label to this Terminal where appropriate, and the banknotes are then further marked in Banknote History.
...
See: https://generalbytes.atlassian.net/wiki/spaces/ESD/pages/2748186625/Organization#Banknote-Labels
See: https://generalbytes.atlassian.net/wiki/spaces/ESD/pages/965771371/Terminal+Cash#BANKNOTE-HISTORY
...
Currencies
...
You'll need to have at least one type of paper currency setup in (“Fiat Settings”) and one type of crypto-currency setup in (“Crypto Settings”) to complete this section.
Main Cash Currency **: select the primary type of currency your bill acceptor is designed to receive. Your particular bill acceptor model can be determined from the BATM admin screen.
| Warning |
|---|
This is a mandatory field and must be entered to save the Terminal setting. |
Crypto Settings
...
Assign a Crypto Setting to each Crypto Currency identified in the previous step.
| Warning |
|---|
This is a mandatory field and must be entered to save the Terminal setting. |
Languages
General Bytes' products supports many languages, and is constantly adding more!
...
Default Language **: the language that the BATM uses unless another is selected (see appendix “B”).
| Warning |
|---|
This is a mandatory field and must be entered to save the Terminal setting. |
...
Preferred Languages **: the languages you wish to offer the customer for BATM usage.
See: Supported Languages
Choose the ones most likely to be used in your locale.
| Tip |
|---|
See Acceptors (above) to identify your supported billset.
|
Additional Cash Currencies: if your bill acceptor takes multiple currencies, specify them here. See the bill acceptor specifications for your BATM to determine what currencies are supported.
Example: for US sales - the US Dollar, the Euro, & the Canadian Dollar (USDEURCAD) billsets are installed by default in the BATM, so in this example you would set “USD” as the “Main Cash Currency” (above) and add “EUR” and “CAD” here. You may skip this area if you only want to accept the main cash currency (USD).
Crypto Currency **: select the types of crypto-currency you support. Each type will need an entry in the main menu's “Crypto Settings”.
| Warning |
|---|
This is a mandatory field and must be entered to save the Terminal setting. |
Custom Strings
These messages are displayed on your BATM, receipts, and messages.
See: Custom Strings
Location
...
| Tip |
|---|
Setup each coin with its own Crypto Setting. |
Fiat Settings
...
Assign a fiat setting to each Cash Currency identified in the previous step.
| Warning |
|---|
This is a mandatory field and must be entered to save the Terminal setting. |
Location **: the location at which this BATM will installed. This will show up on CoinATMRadar.
Location From Date **: the starting date this BATM will be at this location.
...
CORRECT LOCATION: to update a location after the fact,
CORRECT FROM DATE: the change the deployment date, after the fact,
MOVE TO NEW LOCATION: the BATM is being deployed elsewhere,
SHOW HISTORY: show the history of deployments.
Printing Settings (for BATMs with printers)
...
Allow Paper Wallet Print: enable to allow paper wallets as an option.
Disable Printer Warnings: turn off “low paper” (etc) warnings.
Print POS Receipt: (undocumented & unsupported)
Print Buy Receipt: Never/Always/On Demand
Cash/Card Settings
...
Cash Collection Mode:
0 - DEFAULT - None
1 - Removed cashbox automatically clears short counters and prints cashbox contents.
2 - Removed cashbox requires confirmation on the screen to clear counters and print cashbox contents.
Display Last Cash Collection In Terminal Administration: when enabled, displays the most recent cash collection time, date, and amount on the BATM’s onsite ADVANCED ADMINISTRATION screen.
...
entered to save the Terminal setting. |
Crypto Settings
...
Assign a Crypto Setting to each Crypto Currency identified in the previous step.
| Warning |
|---|
This is a mandatory field and must be entered to save the Terminal setting. |
...
Languages
General Bytes' products supports many languages, and is constantly adding more!
...
Default Language **: the language that the BATM uses unless another is selected (see appendix “B”).
| Warning |
|---|
This is a mandatory field and must be entered to save the Terminal setting. |
...
Preferred Languages **: the languages you wish to offer the customer for BATM usage.
See: Supported Languages
Choose the ones most likely to be used in your locale.
| Warning |
|---|
This is a mandatory field and must be entered to save the Terminal setting. |
...
Custom Strings
These messages are displayed on your BATM, receipts, and messages.
See: Custom Strings
...
Location
...
These settings allow you to record deployment locations for documentation purposes. It allows you to identify what sales happened where, which is a prudent record to have available.
| Warning |
|---|
This is a mandatory field and must be entered to save the Terminal setting. |
Location **: the location at which this BATM will installed. This will show up on CoinATMRadar.
Location From Date **: the starting date this BATM will be at this location.
...
CORRECT LOCATION: to update a location after the fact,
CORRECT FROM DATE: the change the deployment date, after the fact,
MOVE TO NEW LOCATION: the BATM is being deployed elsewhere,
SHOW HISTORY: show the history of deployments.
...
Printing Settings (for BATMs with attached printers)
...
Allow Paper Wallet Print: enable to allow paper wallets as an option.
Disable Printer Warnings: turn off “low paper” (etc) warnings.
Mandatory Paper Wallet Scan: when enabled, forces your customer to scan their printed QR code (after printing) to ensure the print was completely successful (and physically/legally received).
Print POS Receipt: (deprecated, undocumented & unsupported)
Print Withdrawal Receipt: [Never / Always]
Print Buy Receipt: [Never / Always / On Demand]
Sell Tickets Delivery: [Print / Send via SMS / None] enables your customer to conduct a SELL offsite and retrieve their fiat via any of your 2-way machines.
The SMS text is customized in “Custom Strings: sms_sell_crypto_ticket_template”
...
Cash/Card Settings
...
Dispense Cash Algorithm: choose the preferred method of dispense operations:
0 - Minimum Number of Banknotes (default)
1 - Recycler Priority (send lower denomination banknotes from the Recycler whenever possible).
Cash Collection Mode:
0 - DEFAULT - None
1 - Removed cashbox automatically clears short counters and prints cashbox contents.
2 - Removed cashbox requires confirmation on the screen to clear counters and print cashbox contents.
Display Last Cash Collection In Terminal Administration: when enabled, displays the most recent cash collection time, date, and amount on the BATM’s onsite ADVANCED ADMINISTRATION screen.
Disable if you feel it is a security risk.
Risk Box: if you’re feeling particularly trusting with your business model, you may allow customers to withdraw SELL transactions under this specified amount without the required mining confirmations. This is a dangerous practice, but it is your choice. Use at your own risk!
Card Issue Mode (for NFC card-enabled machines):
0 - DEFAULT - Don't Issue Cards
1 - Issue Cards
2 - Issue Cards Only After SMS One Time Password
3 - Issue Cards Only After Fingerprint
...
Face Search
...
Face Capture Active: will capture a silent selfie during every transaction when enabled.
Publish Settings
...
You may choose to keep your BATM hidden. Otherwise, publish it!every transaction when enabled.
...
Publish Settings
...
You may choose to keep your BATM hidden - otherwise, publish it! The information is shared with third-party websites that steer customers towards the nearest Bitcoin ATM. The customers then give you money. You like money, right?
| Tip |
|---|
Setup your account with coinatmradar.com these companies to add your BATMs to their website:
|
Publish To HQ (GENERAL BYTES): check to enable publication. CoinATMRadar.com polls our reporting API periodically to share the information you provide with the world.
Show Terminal Location: as set in “Locations” for the applicable Terminal.
The map coordinates displayed on the Location map are used by CoinATMRadar - not the addressprovider.
For help with Locations, seeSee: Locations
Show Terminal Prices: the crypto prices as set in “Crypto Settings”.
...
Show AML Type: whether or not AML/KYC is implemented on this BATM, and those requirements.Report Cashboxes Contains Of IN Type: the type of currency accepted as set in “Fiat Settings”.
Report Buy Available: turns “Buy” on/off at Coin ATM Radar.
Report Sell Available: turns “Sell” on/off at Coin ATM Radar.
Report Cashboxes Contains Of IN Type: the supported currencies accepted (as set in “Fiat Settings”).
Report Cashboxes Contains Of OUT Type: the supported currencies dispensed (as set in “Fiat Settings”).
Terminal Public Name: a description of the BATM, visible to the customer at the BATM location.
...