Configure your NFC Card Dispenser/Writer

NFC (Near-Field Communication) cards containing a new wallet’s private key may be issued from your BATM. Customers can reuse these cards as desired.

Custom-printed NFC cards are useful advertisements.

The NFC card readers in our system are NTAG216 compatible.

There’s not much configuration required, but here’s the procedure:

Set "Card Issue Mode" in the terminal settings.

Fill the NFC cards in the NFC card dispenser.

Maximum capacity is about 125 cards.

First insert the NFC cards:

Then place the provided custom weight on top of the stack to ensure all cards feed properly:


Here’s a handy video if you need to see some live action: https://youtu.be/V8-rQtzxJWo


Dispensing NFC Cards

Once enabled in CAS, your customers may choose an NFC wallet during purchase:


Copyright © 2022 General Bytes USA LLC