Payment Card Reader CAS Configuration

Currently, two different card reader vendors are supported in CAS. Select the reader you’ve acquired from the vendor for Terminal configuration. The remaining instructions are identical.

• At this time, card readers are only supported in Europe.

Worldline Valina

QpayPOS Q5000

Hardware Installation Instructions

Worldline Valina

For each Terminal that has a Valina installed:

1. Add the EUR fiat.

2. Set the Terminal’s AML/KYC to use EUR.

3. Add to the Terminal’s Custom Strings → special_configuration to include:

   1. cardpayment paymentcardreaderid=XXXXXXXX

   2. NOTE: both cardpayment and the paymentcardreaderid=XXXXXXXX strings are required!

Example:

Open

• Payment Card Reader ID = eight digits unique to each card reader.

• These digits are labeled as a “TID#” on the device.

QpayPOS Q5000

QpayPOS web page for the Q5000: https://qpaypos.es/eu/q5000/

Notes

At the time of the creation of this article The QpayPOS card reader supports EUR transactions only.

• Each connected Terminal must include the EUR fiat, and

• include EUR in the respective AML/KYC setting.

Setup Instructions

For each Terminal that has a Q5000 installed:

1. Add the EUR fiat.

2. Set the Terminal’s AML/KYC to use EUR.

3. Set the Terminal’s Custom Strings → special_configuration to include: cardpayment cardpaymenttype=qpay

   1. NOTE: both cardpayment cardpaymenttype=qpay strings are required!

Example Custom String:

Open

Reporting

After the first card transaction, a new section “payment_card_terminal” will appear in the Cash report:

Clicking “SHOW TRANSACTIONS” on that page will now generate a card (only) transaction report:

Banknote History will now also list card payments (in the payment_card_terminal Cash Box):

An example of a card purchase at the BATM:

Hardware Installation Instructions