LED Color Strip: Changing Colors

The BATM LED ring that circles the display are adjustable in 16 ways. All models with switchable LEDs use the same switch module. This article describes how to set them.

The LED configuration may be switched while the unit is powered on.

Remove the EM shield (as needed) to access the switch module.

BATMThree switch assembly is located here:

BATMFour switch assembly located here:

Here’s a closeup of the common switch module:

And this is how you set them:

Configuration	Color	Effect	Notes

Color	Effect	Notes
Red	Solid, bright
Red/Blue	Bidirectional Chase	Red & Blue lines alternatively rotate clockwise & counter-clockwise, chasing each other.
Red/White	Bricklayer	Starting white, a counter-clockwise stacker slowly adds clockwise chunks of red until completely full, then restarts.
Red/White	Clockwise Chase	A white band overtakes a red band.
White/Red	Clockwise Chase	A small white band rotates within solid red.
Purple	Solid
Green	Solid
Yellow	Solid, bright
Yellow	Solid, dim
Aquamarine	Solid
Blue	Solid
White	Solid
White	Strobe	WARNING: this may trigger an epileptic seizure. Not recommended for use in public areas!
Rainbow	Rotating	All colors show simultaneously. continuous rainbow rotates counter-clockwise.
Rainbow	Slide	Red, Blue, and Green each slide in from White. clockwise fade-in, slow rotation.
Rainbow	Fade	Colors of the rainbow slow-fade switch.

And if you desire to turn off ALL the LED’s, simply disconnect the power to the module: