CAS Installation Overview

Owned by Charles Wernicke
Last updated: Oct 30, 2024
1 min read

Installation is a series of steps. Each step is critically important, and this overview outlines the order required. This page is one of several in a sequence shown here: https://generalbytes.atlassian.net/l/cp/uj6YTXXY

READ THIS BEFORE INSTALLING/UPGRADING !!

  1. Contact sales to ensure you have access to the APT package repository.

  2. A KYC check will be performed by Sales.

  3. Your license must be verified & approved to successfully proceed.

  4. Allow 2-3 business days for this process to complete.

Create a secure VPS “droplet” to host your CAS:

  1. https://generalbytes.atlassian.net/wiki/spaces/ESD/pages/1002537156

  2. https://generalbytes.atlassian.net/wiki/spaces/ESD/pages/954728558

Install CAS:

  1. https://generalbytes.atlassian.net/wiki/spaces/ESD/pages/2957770754

  2. https://generalbytes.atlassian.net/wiki/spaces/ESD/pages/928710726

Configure CAS:

  1. https://generalbytes.atlassian.net/wiki/spaces/ESD/pages/2888630273

  2. https://generalbytes.atlassian.net/wiki/spaces/ESD/pages/928710739

  3. https://generalbytes.atlassian.net/l/cp/544jfPMT

Prepare to connect your BATMs:

  1. https://generalbytes.atlassian.net/wiki/spaces/ESD/pages/2902687745

Next

Your CAS is now configured and you’re ready to connect your BATMs. Each of the listed steps (above) must be completed before you can successfully connect a BATM.

https://generalbytes.atlassian.net/l/cp/g082YwEm

Copyright © 2020-2024 General Bytes USA LLC