Pro Stand:
The BATMTwo Pro comes with the acceptor and an electronic safe in the stand.
Overview:
Open the safe.
Attach the BATMTwo.
Connect the cables.
Turn it on.
Unbox the stand & BATMTwo:
Open the safe:
Enter the default PIN: 123456
Rotate the handle clockwise (a half turn).
Locate these enclosed items:
Vault Instructions
Extra Vault Key (grey)
Power Cable
3ea Mounting Nut Sets w/washers
BATMTwo Head Keys (in a separate cardbox box inserted in the BATMTwo power cove)
Attach the power cable to the BATMTwo and preset the switch to “ON”.
Place the BATMTwo upon the stand, lining up the mounting bolts:
Be careful not to pinch the power cable.
Open the BATMTwo and fasten the 3 nuts (and washers) to the 3 mounting bolts:
Feed the acceptor cable through the stand into the BATMTwo, and connect:
Plug the A/C adaptor into an outlet and power on your unit.
IF YOU BOLT THE STAND TO THE FLOOR, BE CAREFUL NOT TO TIGHTEN THE BOLTS EXCESSIVELY. THE BASE PLATE CAN WARP, CAUSING THE VAULT DOOR TO JAM!
Continue with the standard BATMTwo setup found here: BATMTwo Quick Start
Relevant articles: