Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

Changing the Admin QR Code is an important step in strengthening your BATM's security.

  • Your BATM will only recognize ONE Admin Key.

Admin QR code not working?

The BATM will only recognize the most recent admin key downloaded from CAS.

  • First try using the factory default QR code.

  • The key can only be changed while successfully connected to CAS.

Worst case scenario: reset the admin key code to the factory default:

https://generalbytes.atlassian.net/l/cp/k0gJn131

1. First, generate a new QR code.

https://generalbytes.atlassian.net/l/cp/CKX0V3QX

2. In CAS, navigate to each Terminal: Settings

  • Paste the password from the step 1.

  • Repeat for each & every Terminal in CAS.

3. Save the settings:

  • The BATM will now download the key, and it should be effective within minutes.

  • No labels

Copyright © 2020-2024 General Bytes USA LLC