Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Version History

« Previous Version 6 Next »

Effective with version 20230801 (and newer).

This article assumes:

  1. the Terminal has been added to CAS and is displayed in “Terminals”, and

  2. the Terminal VPN credentials have been generated for this BATM from the CLI.

CAS will display a new “PAIRING REQUEST” in Terminals after the BATM connects:

Clicking on the tab shows you the Terminal details:

NOTE THE CERTIFICATE FINGERPRINT.

Compare the Certificate fingerprint to the “pairing code” displayed on the BATM:

If the codes match and the pairing is expected, approve the pairing:

  • This example will FAIL because the VPN configuration has not yet been generated (red X under VPN).

  • Your User must have 2FA implemented to approve the pairing.

    • If you haven’t already activated 2FA, then activate 2FA before pairing, and

    • refresh and re-enter the pairing screen.


TitleCreatorModified
OOO: Client Certificate MismatchCharles WernickeNov 06, 2024
Terminal PairingCharles WernickeOct 25, 2023
Troubleshooting pairingKarel KyovskyOct 16, 2023
Establishing Trust between Terminal and Server - Terminal PairingKarel KyovskyOct 16, 2023
  • No labels