The BATM LED ring that circles the display are adjustable in 16 ways. All models with switchable LEDs use the same switch module. This article describes how to set them.
The LED configuration may be switched while the unit is powered on.
Remove the EM shield (as needed) to access the switch module.
BATMThree switch assembly is located here:
BATMFour switch assembly located here:
Here’s a closeup of the common switch module:
And this is how you set them:
Configuration | Color | Effect | Notes |
|---|---|---|---|
 | Red | Solid, bright | |
 | Red/Blue | Bidirectional Chase | Red & Blue lines alternatively rotate clockwise & counter-clockwise, chasing each other. |
 | Red/White | Bricklayer | Starting white, a counter-clockwise stacker slowly adds clockwise chunks of red until completely full, then restarts. |
 | Red/White | Clockwise Chase | A white band overtakes a red band. |
 | White/Red | Clockwise Chase | A small white band rotates within solid red. |
 | Purple | Solid | |
 | Green | Solid | |
 | Yellow | Solid, bright | |
 | Yellow | Solid, dim | |
 | Aquamarine | Solid | |
 | Blue | Solid | |
 | White | Solid | |
 | White | Strobe | WARNING: this may trigger an epileptic seizure.
|
 | Rainbow | Rotating | All colors show simultaneously.
|
 | Rainbow | Slide | Red, Blue, and Green each slide in from White.
|
 | Rainbow | Fade | Colors of the rainbow slow-fade switch. |