...
Use the 7mm nut driver (provided with the BATM) to remove the 2 nuts.
Feed the cable through the now exposed hole.Replace
3. Feed the cable & reattach the plate
...
(reverse the notch
...
).
...
Note |
---|
WARNING: do NOT pinch the Ethernet cable. |
...
cable |
...
. |
...
75cm (about 30 inches) length of internal cable should suffice.
A few zippy ties will work function well as strain relief. Use 2 or more zippy ties (as needed). Don’t overtighten the zippy ties, don’t knot , or pinch the cable.
4. Run the cable up and to the left.
...