...
Use the 7mm nut driver (provided with the BATM) to remove the 2 nuts.
Run Feed the cable through the now exposed hole.
Replace the plate, reversing the notch, to hold the Ethernet cable.
| Note |
|---|
WARNING: do NOT pinch the Ethernet cable. |
2.
...
Feed the cable & reattach the plate (reverse the notch)
...
.
...
- a
75cm (about 30 inches) length of internal cable should suffice.
A few zippy ties should will work well as strain relief.don’t overtighten the zippy ties or pinch the cable. Use 2 or more zippy ties (as needed).
Don’t overtighten the zippy ties, knot, or pinch the cable.
3. Remove the controller cover plate.
...