| Note |
|---|
In edit, visibility restricted. May expose locking hardware, pictures must be inspected before publication. |
Introduction
This article describes the installation of the Valina card reader on a BATMThree. You will need to use your own tools and equipment. Read the article in advance carefully to determine the required tools.
...
The GB installation kit consists of a small box with a cover on the back. The whole box is then bolted on to the right side of the BATMThree from the inside (protecting it from unauthorized physical access). The card reader must be connected to the same local router as the BATM, no matter whether the BATM connection is via WiFi or cabled.
Connect the Valina to the local router.
The BATM and the Valina must be connected to the same local router!
Port 7784 must be allowed (if the router implements a firewall).
...
Installation steps
Assemble the Enclosure
...