...
This article describes the installation of the Valina card reader on a BATMThree. You will need to use your own tools and equipment. Read the article in advance carefully to determine the required tools.
| Note |
|---|
NOTE THE TID# ON YOUR DEVICE BEFORE INSTALLING IT!You’ll need that number for CAS configuration, and it won’t be visible after this installation. |
Overview
The GB installation kit consists of a small box with a cover on the back. The whole box is then bolted on to the right side of the BATMThree from the inside (protecting it from unauthorized mechanical access).
...
Connect all the cables into the Valina.
Doublecheck the wiring - these connectors won't be accessible after installation.
NOTE THE TID# before proceeding, you’ll need that for your CAS configuration.
...
Close the box and fasten the 6 screws holding the lid to the box.
...