...
Choose and dedicate one or more machines for ATTT testing. It is recommended to have at least one machine from each model. Machines and CAS need to be on version 20240901+.
Connect selected machines to CAS and collect serial numbers of the machines. It is recommended not to connect machines to production CAS for security reasons.
Identify persons in your organization that will have access to ATTT server and collect their email addresses.
Contact GB support requesting access to ATTT server for selected serial numbers and selected email addresses.
GB will send you back activation archive and sends invitation emails to your ATTT users.
Set in special configuration of each terminal that you want to get connected to ATTT server following string
attt=trueand reboot the machine.Extract contains of activation zip archive on flash drive. Flash drive needs to be formatted as FAT32 filesystem(not ex-FAT) and label of the partition must be called
ATTT.Insert the flash drive into the machine’s free USB slot (you may need to disconnect printer for a while if none of the USB ports are fee).
Take out the cashbox from the machine and enter advanced administration menu.
Click at
ACTIVATE ATTTbutton. This will cause machine to copy the activation files from the flash drive to the internal storage and starts connecting to ATTT server. You can now remove the flash drive from the USB port.Terminal is now active and connected to ATTT server. Activation is valid for one year and has to be reactivated every year with new activation files.
Login to ATTT server and click at the terminal’s serial number in the list of terminal serial numbers. You should now see what is displayed at the terminal and be able to perform clicks.
Try manually performing transaction.
Install SikuliX tool and start writing your tests.
...