Page Comparison

If you do not already have an operating server, please see: Setup a BitGo Express Node

BitGo Express is designed and written by BitGo for their BitGo website wallet.

1. Assemble your BitGo Express parameters for CAS:

Parameters are host : port : token : wallet_id : wallet_passphrase

Your actual host & port will be reported by BitGo Express:

port: 3080 is the default port, and is used in most every case & examples below.

2. Prepare your developer API token at BitGo.

To create a new access token:

• Navigate to: https://www.bitgo.com/settings#developerOptions

• Click + Add Access Token

• Enter a descriptive name for the API token.

• “Spending Limits” should be non-zero. Enter appropriate amounts.

• Enter your BitGo Express node server IP.

• Enable all permissions by checking all boxes.

• Agree to the terms, and click "Add Token".

• The next screen reveals your developer API token. Save it!

• It cannot be displayed again!

Locate your wallet_id in your BitGo wallet settings:

Determine your wallet_passphrase.

• Normally this is your account password -unless- you created a new wallet and chose a separate password (which is recommended).

3. Enter the assembled parameters into CAS:

a) Select BitGo Wallet

b) Parameters:    

host : port : token : wallet_id : wallet_passphrase : num_blocks : fee_rate : max_fee_rate

• host is explained towards the top of this article: Understanding “host”.

• port is explained towards the top of this article: Understanding “host”.

• token is from: Create a new access token (above)

• wallet_id is from: Locate your wallet_id (above)

• wallet_passphrase is from: Determine your wallet_passphrase (above)

• num_blocks (optional, default=2) (BTC only): the targeted number of blocks for confirmation. The lower the number, the higher the mining fees (but confirmation is faster).

  • See: this Bitgo article.

• fee_rate (optional): the MINIMUM amount in the basic units of the given cryptocurrency.

  • e.g. Bitcoin: “satoshis per kvByte” (minimum: 1000), must be less than max_fee_rate.

• max_fee_rate (optional): the MAXIMUM amount in the basic units of the given cryptocurrency.

  • e.g. Bitcoin: “satoshis per kvByte” (minimum: 1000).

In this example, using the above, our "Parameters" looks like this (all one line, no spaces):

http://localhost:3080:v2x922bc21177ad708ebbce21fbd7bb4faba5e5f71d7364a901ac6387bd18402aa4:5b58f06d239b32e506435b664b72945d:b788PqEE8cwtFP8nsJTd

4. Enable the GB Wallet Tunnel and enter the tunnel password:

• The BE (Bitgo Express) node should always be on a dedicated & separate server.

• The GB Wallet Tunnel offers a native, secure SSH tunnel connection to the BE node.

• Leave it disabled if you use, understand, and deploy your own alternate form of SSH tunnel.

5. Save the Crypto Setting!

6. Reload the Crypto Setting, and test what you just saved.

Troubleshooting Tips:

The Hot Wallet BUY test validates your parameters.

• The other Crypto Setting tests are irrelevant in this scope.

• The master log will contain relevant entries regarding any failures.

Have you set “Spending Limits” for your authorization token?

Spending Limits are set when creating the access token at Bitgo. A non-zero amount must be listed for each desired coin. If the amount is left as zero, the Crypto Test will pass, while the live transaction will fail.

• A “best practice” is to set the limit to a reasonable minimum. See: https://generalbytes.atlassian.net/l/cp/Xv9ihqgM

• Create a new access token at Bitgo if you experience this issue.

Is your tunnel working?

You’ll see this in the log if the tunnel is connecting correctly:

DEBUG com.generalbytes.batm.server.e.b - opening new tunnel on port 22222, remoteWalletAddress: xxx.xxx.xxx.xxx:3080
DEBUG com.generalbytes.batm.server.e.b - tunnel connected: ClientSessionImpl[batmsshtunnel@yyy.yyy.yyy.yyy/yyy.yyy.yyy.yyy:22222] 42087->3080

• this indicates a secure connection is active between CAS (yyy.yyy.yyy.yyy) and your BitGo Node (xxx.xxx.xxx.xxx). If you don’t see “connected”, then please double-check your tunnel password.

• these log entries have been truncated for ease of viewing. They’ll be somewhat different in your log.

Have you whitelisted your BitGo Express node in your BitGo API keys?

See the instructions above: https://generalbytes.atlassian.net/wiki/spaces/ESD/pages/1001848911/Hot+Wallet+BitGo+Express#2.-Prepare-your-developer-API-token-at-BitGo.

• BitGo must permit your BitGo Express node to connect to it’s network.

A standard Bitgo account permits transactions with only these coins (as of Nov 2022):

Bitcoin (BTC)
Ripple (XRP)
Bitcoin Cash (BCH)
Litecoin (LTC)
Stellar (XLM)
Eos (EOS)
Tron (TRX)
Dash (DASH)
ZCash (ZEC)
Algorand (ALGO)
Mainnet Hedera HBAR (HBAR)
Bitcoin Gold (BTG)
Casper (CSPR)
Polkadot (DOT)
Stacks (STX)
Solana (SOL)
Near (NEAR)

Currently, these are the additional coins that a Bitgo ENTERPRISE account allows:

Ethereum (ETH)
Ethereum Classic (ETC)
Celo Gold (CELO)
Bitcoin SV (BSV)
Avalanche C-Chain (AVAXC)
Rootstock RSK (RBTC)
Stacks (STX)
Polygon (POLYGON)