How to unpack BATMTwoUltra
This is a step by step guide to successfully unpack BATMTwoUltra when a 4 piece pallet is used
Required tools
Drill
Torx bit T20
Torx bit T25
Knife/Scissors
Used mounting hardware
5 x 80 mm T25 screw (used only to palette)
4 x 50 mm T20 screw
Â
 Steps
1. All boxes are assembled in the same way. The screws are marked on the photo with blue stickers, always in the corners and in the middle.
2. Once the outer plywood is removed, you need to:
Remove the plastic wrap,
Cut the strapping tape
Remove the paper box
3. Once you take the box off you only need to dismount the Ultra itself, it is only held to the pallet by a wooden board that is screwed with T25
4. Hooray! You have successfully unpacked Ultra, you can find the key in the back next to schurter filter
Â
 Related article
Â