Uncrating

This is a step-by-step guide to successfully unpack the BATMTwo Ultra when a 4 piece pallet is used.

All boxes are assembled in the same way.

• The Torx screws are marked in the photo with blue stickers,

• always in the corners and in the middle.

Open

Open

Open

This photo shows the screws on only one half, on the other half, the location of the screws is the same

• Remove the plastic wrap, then

• cut the strapping tape, and

• remove the cardboard shielding.

Open

Open

Open

Same on the opposite side

You have successfully unpacked your Ultras, you can find the key for each next to schurter filter.

Open

Open