View Source

Changing the Admin QR Code is an important step in strengthening your BATM's security.

Your BATM will only recognize ONE Admin Key.

Admin QR code not working?

The BATM will only recognize the most recent admin key downloaded from CAS.

First try using the factory default QR code.
The key can only be changed while successfully connected to CAS.

Worst case scenario: reset the admin key code to the factory default:

https://generalbytes.atlassian.net/l/cp/k0gJn131

1. First, generate a new QR code.

https://generalbytes.atlassian.net/l/cp/CKX0V3QX

2. In CAS, navigate to each Terminal: Settings

General Bytes Knowledge Base > Change the BATM Admin QR Code > ILgzBKZekT2FhmyBodkNCgY47f1hr4Ua.png

Paste the password/key/string from the step 1.
Repeat for each & every Terminal in CAS (or use the BATCH ACTIONS).

3. Save the settings:

General Bytes Knowledge Base > Change the BATM Admin QR Code > s6TH2OdbGHLwJIQQ9atFdPRXG1Fhi5M6.png

The BATM will now download the key, and it should be effective within minutes.

Related articles

The content by label feature displays related articles automatically, based on labels you choose. To edit options for this feature, select the placeholder below and tap the pencil icon.

Related issues